Selve Commeo Multi Send 32 handheld transmitter

Selve Commeo Multi Send 32 handheld transmitter

The Commeo Multi Send handheld transmitter is the control centre for fully automatic, radio-controlled home automation, with 32 channels. The transmitter fits comfortably in the hand and features a modern, timeless design.
With the Commeo Multi Send, you can control all wireless actuators and receivers in your home, either individually or collectively in groups, for example by room. The systems can be controlled by pressing a button, automatically via an integrated Timer, or at sunrise or sunset.
Simple initial set-up: when connected via the integrated USB port, the initial configuration can be carried out easily on a laptop using the configuration tool

- individual programme, adjustable switching times
- astro programme: switching times correspond to sunrise and sunset
- holiday programme: ± 15 minutes around the set switching time
- large backlit display
- Flexible grouping and naming of assigned devices, channels and groups
- Set individual sensor parameters for assigned sensors
- frequency 868 MHz
- battery: 3 V DC, 2xAAA
- Operating temperature: 0°C to +55°C
- Protection rating: IP 20
- Dimensions: 40 × 160 × 18 mm (W × H × D)
- 32 channels, 16 groups and 1 central group
- 4 switching times can be set per group
- Includes wall bracket with magnet

Programming a new handheld transmitter if the existing one is faulty or missing

- Disconnect the power supply for 3 seconds
- Reconnect the power supply for 3 seconds
- Disconnect the power supply for 3 seconds
- Switch the power on
- Press and hold the PROG button on the Transmitter for 3 seconds
- all old transmitters/channels have been deleted and the new transmitter
has been programmed

Programming additional handheld transmitters/channels

- Press and hold the PROG button on a remote control that is already working
Handheld transmitter; it will confirm this by briefly opening and closing.
- The receiver remains in programming mode for 1 minute
- Briefly press (1 sec.) the PROG button on the new handheld transmitter
or the new channel
- The new Transmitter or the new channel is now programmed